1-800-600-TURF
  FREE SHIP
With $50 Min

Shopping Cart
Your cart is empty.
Browse by Manufacturer
Authorized Dealer
  • Genuine Marathon Sod
  • Rain Bird
  • Hunter
  • Toro
  • We stock all the
    major manufacturers

  • Serving You
    Since 
    1977
 
 
  • Se Habla Español
  • Free shipping with $50.00 Minimum Purchase. 

Rain Bird XFD0918100 Dripline Tubing

<< Previous in RainBird Drip Next in RainBird Drip >>
Our Price: $30.00
Item Number: RB-XFD-09-18-100
Manufacturer: RainBird
Manufacturer Part No: XFD-09-18-100
Rain Bird XFD09-18-100 Dripline Tubing
.9 gph Emitters on 18" Spacing in a 100 ft. Roll
Product Description
The most flexible, pressure-compensating inline emitter tubing available to irrigate ground cover, dense plantings, hedge rows and more. Extra flexible tubing for fast, easy installation.
Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, UV damage and algae growth. Patent pending emitter design provides for increased reliability. Longer lateral runs than competition.
  • XF Dripline - 0.9 GPH, 18 in. Spacing, 100 ft. Coil
  • Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation
  • Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications
  • Accepts Rain Bird  17mm insert fittings
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi
  • Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage

Operating Range

  • Pressure: 8.5 to 60 psi (0.7 to 4.1 bar)
  • Flow rate: 0.9 gph  (2.3 l/h)
  • Temperature: Up to 100° F (43.3 C) water; up to 125 F (51.7° C) ambient
  • Required filtration: 120 mesh 
  • Specifications
    • Outside diameter: 0.634" (16.1 mm)
    • Inside diameter: 0.536" (13.6 mm)
    • Wall thickness: 0.049" (1.2 mm)
    • Spacing: 18"
    • Length: 100' coil
    • Use with  17mm Insert Fittings
  • Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
  • Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications.
  • Accepts  17mm insert fittings.
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil.
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
  • Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
Operating Range
  • Pressure: 8.5 to 60 psi (0.7 to 4.1 bar)
  • Flow rates: 0.6 gph and 0.9 gph (2.3 l/h and 3.5 l/h)
  • Temperature: Up to 100° F (43.3 C) water; up to 125 F (51.7° C) ambient
  • Required filtration: 120 mesh

Specifications

  • Outside diameter: 0.634" (16.1 mm)
  • Inside diameter: 0.536" (13.6 mm)
  • Wall thickness: 0.049" (1.2 mm)
  • Spacing: 12", 18" or 24"
  • Lengths: 100', 250', and 500' coils
  • Use with  17mm Insert Fittings.

The flexible polyethylene tubing shall have factory installed pressure-compensating, inline emitters installed every 12-24 inches. The flow rate from each installed inline emitter shall be 0.6 or 0.9 gallons per hour when inlet pressure is between 8.5 and 60 psi.

The inline emitter diaphragm shall have a pressure-regulating diaphragm with a spring action allowing it to self-rinse if there is a plug at the outlet hole. The bend radius shall be 3 inches whether bending the tubing with the natural bend of the coil or against it.

The inline emitter inlet shall be raised off the inside tube wall to minimize dirt intrusion. The XF™ Series Dripline inline tubing shall be manufactured by Rain Bird Corporation, Azusa, California.